PIC18F67J50-I/PT High-Performance, 1-Mbit Flash USB Microcontrollers 48 MHz 50 I/O 2V to 3.6V TQFP-64

Universal Serial Bus Features:

• USB V2.0 Compliant SIE
• Low Speed (1.5 Mb/s) and Full Speed (12 Mb/s)
• Supports Control, Interrupt, Isochronous and Bulk Transfers
• Supports up to 32 Endpoints (16 bidirectional)
• 3.9-Kbyte Dual Access RAM for USB
• On-Chip USB Transceiver

Flexible Oscillator Structure:

• High-Precision PLL for USB
• Two External Clock modes, up to 48 MHz
• Internal 31 kHz Oscillator, Tunable Internal Oscillator, 31 kHz to 8 MHz
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
  • Allows for safe shutdown if any clock stops

Peripheral Highlights:

• High-Current Sink/Source 25 mA/25mA (PORTB and PORTC)
• Four Programmable External Interrupts
• Four Input Change Interrupts
• Two Capture/Compare/PWM (CCP) modules
• Three Enhanced Capture/Compare/PWM (ECCP) modules:
  • One, two or four PWM outputs
  • Selectable polarity
  • Programmable dead time
  • Auto-shutdown and auto-restart
• Two Master Synchronous Serial Port (MSSP) modules supporting 3-Wire SPI (all 4 modes) and I²C™ Master and Slave modes
• 8-Bit Parallel Master Port/Enhanced Parallel Slave Port with 16 Address Lines
• Dual Analog Comparators with Input Multiplexing

Peripheral Highlights (continued):

• 10-Bit, up to 12-Channel Analog-to-Digital (A/D) Converter module:
  • Auto-acquisition capability
  • Conversion available during Sleep
• Two Enhanced USART modules:
  • Supports RS-485, RS-232 and LIN 1.2
  • Auto-wake-up on Start bit
  • Auto-Baud Detect

External Memory Bus (80-pin devices only):

• Address Capability of up to 2 Mbytes
• 8-Bit or 16-Bit Interface
• 12-Bit, 16-Bit and 20-Bit Addressing modes

Special Microcontroller Features:

• 5.5V Tolerant Inputs (digital-only pins)
• Low-Power, High-Speed CMOS Flash Technology
• C Compiler Optimized Architecture for Re-Entrant Code
• Power Management Features:
  • Run: CPU on, peripherals on
  • Idle: CPU off, peripherals on
  • Sleep: CPU off, peripherals off
• Priority Levels for Interrupts
• Self-Programmable under Software Control
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
  • Programmable period from 4 ms to 131s
• Single-Supply In-Circuit Serial Programming™ (ICSP™) via Two Pins
• In-Circuit Debug (ICD) with 3 Breakpoints via Two Pins
• Operating Voltage Range of 2.0V to 3.6V
• On-Chip 2.5V Regulator
• Flash Program Memory of 10000 Erase/Write Cycles and 20-Year Data Retention

• Date Sheet :

• Product Attribute	Attribute Value
  Program Memory Size:	128 kB
  Data RAM Size:	3.84 kB
  Package / Case:	TQFP-64
  Maximum Clock Frequency:	48 MHz
  ADC Resolution:	10 bit
  Number of I/Os:	50 I/O
  Supply Voltage - Min:	2 V
  Supply Voltage - Max:	3.6 V
  Data Bus Width:	8 bit
  Minimum Operating Temperature:	- 40 C
  Maximum Operating Temperature:	+ 85 C
  Height:	1 mm
  Interface Type:	EUSART, I2C, MSSP, SPI
  Length:	10 mm
  Moisture Sensitive:	Yes
  Number of ADC Channels:	8 Channel
  Number of Timers/Counters:	5 Timer
  Processor Series:	PIC18
  Product:	MCUs

• Transportations & Payments:

  
  

  

  
  

  FAQ

  
  

  Shipping:

  1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

  safe and strong. Please nitfy me you have any special needs
  2, It will take around 3-5 days to reach your hands.

  Product Type & condition:
  Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

  be, promptly updated.So please consult the stock situation when you inquire.

  Buyer Reading:
  1. Please confirm receipt of products if the items you received,and if the goods was damaged please

  contact us immediately. send the photo to us that we can check and give you best solution

  2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

  sales person will be responsible to send the AWB for the delivered goods in the next workday.

  you can check the AWB in the website which we send to you. For the AWByou also can call to the

  local branch of the express company in your company.

  Pre-sales service :

  1. Our team design and make solutions based on different requirements from different customers.

  2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours

Shenzhen Retechip® Electronic Technology Co., Ltd. was established in 2013, specializing in electronic components distribution business.The products are widely used in communication equipment, power supply, medical electronics, automotive electronics, digital electronics, industrial electronics, display modules, intelligent electronics, new energy, the Internet of things, 5G productsand other fields，With high-quality products, reasonable prices, rapid distributionand timely service, we can provide customers with the most cost-effective products and save customers a lot of time.